DigiBinder Plus SG with Side Glue

The STERLING DIGIBINDER PLUS SG has all of the standard features of The DIGIBINDER® PLUS, including: A stand, which is on casters, as well as a safety cover which will stop the operation of the machine when lifted. More importantly, it includes a vacuum waste removal system, which allows for the use of even heavier duty notching pins, which prepare the spine for gluing. The Digibinder Plus SG also sports an even heavier duty roughing blade and separate side glue pot, allowing for greater side glue control for hinged covers.
  • Speed: Up to 360 BPH
  • Maximum Book Thickness: 2.25" / 57mm
  • Maximum Spine Length: 12.5" / 32cm
  • Maximum Cover Size: 13.4 x 30.75"/34 X 78cm


The DIGIBINDER is a completely self-adjusting. The pneumatic clamp and nipper adjust automatically. A compressor is included. Bind a thin book, then a thick book, without any adjustments whatsoever. Bind two sheets to two inches thick. The unique, heavy duty roughing blade allows for the binding of offset stock, coated stock, and stock with oil based or wax based inks.

Twin glue rollers ensure an even glue application as does a third, metering roller to smooth out the glue. The machine side glues for hinge covers and even creates a light hinge due to the nipper pressure, which is adjustable. Bind perfectly square backed books or pads.

  • Auto Clamp. The clamp adjusts automatically between two sheets and 2.25 inches. Both the clamp and nipper are pneumatic, run by the supplied silent compressor.
  • Roughing Blade. The unique roughing blade includes a serrated edge which can also hold up to six notching pins. This allows for maximum glue penetration and book strength.
  • Side Gluing. The Digibinder side glues the rear of the spine by use of a side gluing pin. The book is then nipped in such a way that glue is forced into the front of the book creating a line of side glue there as well.
  • Twin Glue Rollers. Two glue rollers saturate the spine with glue. A third metering roller smooths out the glue to the desired thickness.
  • Nipper Control. The distance that the nipper travels can be set to produce more square backed books. The dwell time can be set up to 3 seconds. The nipper height can also be adjusted.
  • Stand/Safety Cover. The Digibinder Plus includes a stand on casters. The compressor and vacuum are installed in the stand. A safety cover disables the machine when in the open position.
  • Heavy Duty Notching. The Digibinder Plus sports heavier duty notching pins, designed to grind deeper into the spine to facilitate the binding of problems stocks.
  • Waste Removal. The Digibinder Plus includes a vacuum waste removal system. This facilitates the ability to rough and notch deeper to maximize the strength of the book.
  • Maximum Book Thickness: 2.25″ / 57mm
  • Minimum Book Thickness: 2 sheets
  • Maximum Spine Length: 12.5″ / 32cm
  • Maximum Cover Size: 13.4 x 30.75″/34 X 78cm
  • Power: 220V 1 Phase 12 Amps/2.3kw
  • Dimensions: 32″ L X 54.4″ W X 52″ H / 81.3 L X 138 W X 132cm H

You may also like…