Description
The MS-5 is a great addition to any full-scale graphics supply or print shop. The robust design supports continuous use of up to 5 holes simultaneously. With its optional narrow heads, the MS-5 is capable of drilling medical form requirements in a single drilling cycle. Reference the product brochure in the ‘Additional Resources’ tab for more information.
Proudly manufactured in the USA, The MS-5 continues our legacy of providing… assurance you made the right decision.
Multi-Hole Drilling – up to 5 Holes
Side Guide Adjustments
Backgauge Adjustments
Easy Drill Length Adjustment
2″ Hollow Drill Bits Available in 13 sizes
2-1/2″ Hollow Drill Bits Available in 4 sizes
Hollow Drill Bits Also Available With Teflon Coating
General
| Maximum Number of Drill Heads | 5 |
| Drill Sizes Available (2″ capacity) | 1/8″ to 1/2″ / 3 to 13 mm |
| Drill Sizes Available (2-1/2″ capacity) | 1/4″ to 1/2″ / 6 to 13 mm |
| Center to Center Distance Maximum | 15″ / 38 cm |
| Center to Center Distance Minimum (standard) | 1-7/8″ / 48 mm |
| Center to Center Distance Minimum (w/ optional narrow-heads) | 1-3/8″ / 35 mm |
| Maximum Drilling Capacity | 2-1/2″ / 63 mm |
| Strokes per Minute (adjustable) | Up to 18 |
| Backgauge Adjustment | 0 to 5″ / 0 to 13 cm |
| Vertical Adjustment of Individual Heads | 1/4″ / 6 mm |
Dimensions
| Table Size | 17-3/4″ x 34″ / 45 x 87 cm |
| Table Height | 37″ / 94 cm |
| Overall Height | 56″ / 142 cm |
| Floor Space Needed | 36″ x 36″ / 92 x 92 cm |
| Net Weight (approximate) | 830 lbs / 374 kg |
| Shipping Weight (approximate) | 910 lbs / 410 kg |
Electrical (standard)
| Motor Type | Hydaulic Motor |
| Base Power | 1 Phase, 60 Hz, AC. Pump: 1/2 H.P. Spindle Motor: 1-1/2 H.P. |
| Power option | 208/230 Volt, 18 Amps (Recommended service size: 30 Amps) |
Electrical (optional)
| Motor Type | Hydaulic Motor |
| Base Power | 3 Phase, 50 Hz, AC. Pump: 1/2 H.P. Spindle Motor: 1-1/2 H.P. |
| Power option | 208/230 Volt, 12 Amps (Recommended service size: 20 Amps) |
Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.
